Blog Ethos

A blog to provide up to date information on the restoration of Dubs and Co. steam locomotive, builders no. 1415. An initiative to pass on the skills and knowledge necessary to restore a steam locomotive.

Builders Photo

Builders Photo
Builders photo depicting sister engine #1414

History

HISTORY

Steam locomotive carrying Dubs and Company's serial no. 1415, was one of two purchased new by the Queensland Government Railways for use on the Bundaberg - Mt. Perry railway. They were shipped from the United Kingdom in the ship "Scottish Admiral" and were first used in February 1881. They carried Dubs and Company's nos. 1414 and 1415 and were given running numbers on the Bundaberg Railway of 1 and 2 respectively.

In the 1889-90 renumbering of Queensland Railways rolling stock, both locomotives received the classification of 4D9 and No. 2 was renumbered 131. In August 1894, it was sold to the Colonial Sugar Refining Co. for use at their Childers Sugar Mill. The Childers Sugar Mill closed down about 1915, and the locomotive was sold in 1917 to the Macquarie Harbour Board for use in the construction of the Macquarie Harbour breakwater Strahan Tasmania.

The latter sold it to Mr. R.J. Howard a saw miller of Zeehan on the 23rd May, 1941 and he, in 1942, sold it to a Mr. J. Hood. It was to have gone to the Butler Gorge hydro-electric station construction, but this did not take place. It was later sent to Hobart, where it lay idle, in the Railway Yard, for many years.

Project Overview

PROJECT OVERVIEW

The key aim of this project is to restore Dubs No.1415 back to its as built condition, so that it sits proudly in the Don River Railway collection. It will help future proof steam operations at the Don River Railway, by providing a more cost effective locomotive to run, maintain and keep in regular service.

By having this project at the Launceston workshop it is hoped that new and existing members, young and old will get involved in this exciting restoration project. The project is a tool to educate members on what it takes to inspect and restore a steam locomotive. Of particular importance is the passing on of knowledge and skills before they are lost to time.

Help

WE NEED YOUR HELP TO RESTORE DUBS NO. 1415 BACK TO AS BUILT CONDITION.

The restoration of a vintage steam locomotive is no easy task and can cost considerable money, we need to raise money to pay for materials and services to get this loco back in pristine condition. If you can afford to donate some money towards the project we will be very grateful and for all donations over $2, we can provide you with an official receipt to claim the donation on your Australian tax return where applicable.

If you can donate time to the project, why not become a member. no skills required!

If you feel that you or your company can contribute to this project in anyway, please feel free to contact the project coordinator by the contact details on the right side of this blog.

Saturday, 30 July 2016

A few things have happened since the last post, small in the big picture of things but never the less important,
 Plans for a new boiler are being drawn.
 A dfx file was drawn which allowed a new reverser quadrant to be lazer cut and put into store.
 Enough Celery Top pine has been donated to make all the cab window frames.
 A Fantastic Donor will purchase two new clack/feed check valves.
 We now have a bell shaped whistle.
 An "A" frame sandwich board should be available from Monday 8th of August.

 I have expressed previously the difficulty in getting some components to separate because they seem to be welded together by rust. Today we finally removed the left side valve rod. The right side is a different proposition. The pin that joins the valve rod to the 1 to 1 lever is seized solid in the centre section of the joint. I don't know how we are going to overcome this because its not in a position where you can use a porta power or similar.
We still have about 12 stubbornly seized components to deal with.
The exhaust steam pipes from the cylinders have been removed and blanks bolted to the flanges.
The valve rod gland followers have been removed for cleaning out the oil reservoirs and polishing.
Posted by at